Xtramus NuApps-2544-RM V1.3 - Manual (Page 34)

34
One to Many
In One to Many test mode, packets will be sent from one source port to multiple destination ports as
shown in the figure above.
Port Pairing/Assigning for One to Many Mode
1. Choose a port that will serve as the source
port from the Source Port field.
2. Choose ports that will serve as the
destination ports from the Available Ports
field.
3. Click the 〈 button to add the destination
port you’ve selected in step 2.
4. The port you’ve selected will be added to
the Destination Port field. You can remove
one destination port by clicking the 〉 button,
or remove all destination ports by clicking
the 〉
〉 button.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®