Xtramus NuApps-2544-RM V1.3 - Manual (Page 36)

36
Rotate
In Rotate test mode, packets will be sent from port to port in a loop while the last port will be connected
to the first port, as shown in the figure above.
Port Pairing/Assigning for Rotate Mode
1. Choose the ports that will be used in the
Rotate test mode from the Source Ports
field,
2. Click the 〉 button to add the port you’ve
selected in step 1. The ports you’ve added
will be shown in the Rotate Group
Member field. You can remove one port
by clicking the 〈 button, or remove all
ports by clicking the 〈
〈 button.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®