American Time Wireless Remote Transmitter - Manual (Page 18)

© American Time
18
Wireless Remote Transmitter Installation Manual
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
Transmitter and System Setup
Intr
oduction
Remote Transmitter Connect
Web Interface
Manual Activation:
Figure 6
1. Enabled: This allows the user to enable or disable which circuits should be manually activated.
2. Signal Duration: This is the duration which the circuit will manually activate.
3. Message Number: This is used to select the message that will be displayed prior to a countdown.
n Note: This message number is only applicable if you have an SQAxxxxxxC(1-6) digital clock. A message number of 0
disables this feature.
4. Countdown Duration: This is used to select the duration of the countdown (0-59 minutes).
n Note: This countdown duration is only applicable if you have an SQAxxxxxxC(1-6) digital clock. A countdown duration of 0 disables
this feature.
5. Circuit Description: This is the description of the circuit as assigned in the Schedule Tab.
6. Wireless: This will signal the wireless enabled circuits only for the duration specified in the Signal Duration.
Message 1 - Bell 1 Message 2 - Bell 2 Message 3 - Fire
Message 4 - Custom Message 5 - Custom
Calendar Clock Message Displays
Digital Clock Message Displays