American Time Wireless Remote Transmitter - Manual (Page 6)

© American Time
6
Wireless Remote Transmitter Installation Manual
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
Transmitter and System Setup
Intr
oduction
Back - UPS ES 550
Surge Pr otection
Power On Replace Battery
Battery Backup+ Surge Protection
Remote Transmitter
Installation
server rack
Shown with optional rack mount
kit, Part No. H004137
Remote Transmitter with Magnetic Mount Antenna
The Magnetic Mount antenna can be used with any of the models and is specified when ordering.
1. Choose a suitable location for the Remote Transmitter, following the safety precautions on Page 1:
a. Place the Remote Transmitter indoors.
b. Locate within 10 ft. of planned location for antenna.
c. Locate near an electrical outlet (120vac).
d. Rack or shelf mount.
e. Locate in an area with a network drop, or run a Ethernet data cable to the unit from a network switch or hub.
2. Install the magnetic mount antenna per the instructions on Page 6.
3. Connect the cables to the Remote Transmitter:
a. Connect the antenna cable to the Antenna port.
b. Connect the power cord to the Remote Transmitter.
c. Connect the power cord to 110v electrical supply (American Time recommends using surge protector/battery
backup Part # H002717A shown).
4. Turn on the power to the Remote Transmitter:
a. Place the rocker switch on the back of the unit to the ON position as shown above.
b. Confirm that the red ON LED on the front of the unit is lit.
Part #H002717A