Beisler 739-23-1 Program - Manual (Page 32)

2.3 Installation of Dacs739
– Terminate all programmes in Windows and deactivate all virus scan
programmes.
– Place the Dacs739 CD into your CD-ROM drive
or
insert disk no. 1 into your 3.5" floppy drive.
– Follow the instructions of your platform:
For Windows NT 3.5.1, select the “Run” command from the “File”
menu of the programme manager.
For Windows 95, 98 or Windows NT 4.0, select the “Run” command
from the start menu.
– Enter d:\setup.exe (whereby d: is your CD-ROM drive)
or
enter a:\setup.exe and click “OK”.
– The “Welcome” screen is displayed. Follow the instructions on the
screen.
– Click “Next”.
Confirm the default values for target drive and folder displayed
under “Target folder”.
Click “Browse” or enter a different folder and/or drive.
– Click “Next”.
Confirm the programme folder displayed under “Programme
folder”,
or
enter a different folder.
– Click “Next” to start the installation.
– When asked to do so, insert the next disk into the floppy disk drive.
2.4 Starting of Dacs739
– Follow the instructions for your platform:
Open the programme group “Dacs739" in the programme manager
of Windows NT 3.5.1 and double-click the ”Dacs739" programme
icon.
In Windows 95, 98 or Windows NT 4.0, click the start menu and
select “Programmes > Dacs739> Dacs739".
4-32