Beurer BF 100 - Manual (Page 20)

20
For the analysis, see “Analysing results” on page 21.
When the unit is switched off, the measurement is
saved automatically.
If several measurements are taken on one day, only
the last measurement is saved.
Analysis of the measured values following
a measurement
Graph
Weight
• Press the [ ] menu button on the control unit to
switch to individual submenus or memories.
The progression of your body weight is shown from
measurement to measurement. Newer measurements
are added on the right. The reference line represents
your target weight.
You must define a target weight in order to be
able to display the progression of your body weight,see
page 18. You can change the target weight at any
time.
Body fat
• Use the [ ,
] buttons to switch to the body fat
graph. The progression of your body fat is shown
from measurement to measurement.
The reference line represents the average value of all
body fat measurements, the bars indicate whether the
values have moved up or down.
Upper body, lower body
Body fat
• Press the [ ] button on the control unit to switch to
the detailed view for the upper/lower body.
The current body fat measurement is shown both as
the entire body and divided into upper/lower body.
Muscle
• Use the [ ,
] buttons to switch to the detailed
view of muscle mass.
Only the current measurement results can be dis-
played, not the old saved measurement values.
Mem Displaying saved values
• Press the [ ] button on the control unit to switch to
the Memory screen.
The overview is displayed. The date of the measure-
ment is shown at the top, together with the memory
location number (03-03) e.g. the third (= last) memory
location of a total of 3 occupied memories.
• Use the [ , ] buttons to scroll through the memo-
ries.
Averages
• Press the [ ] button on the control unit to switch to
the Average screen.
All the averages from the saved measurements are
shown.
The dates of the first and last mea surements are
shown at the top.