Comtech EF Data CSAT-6070 - Manual (Page 48)

50 Watt Model C-Band Transceiver Revision 0
Installation MN/CSAT607050.IOM
2.6.2.3 A SSEMBLE R EDUNDANT C ONFIGURATION
1. Place unistrut bracket (1, Figure 2-1) on a flat surface.
2. Slide two springnuts (9) into the channel of the unistrut bracket.
3. Fasten two pipe blocks (11) loosely to the springnuts using two bolts (6), two
flat washers (7), and two splitlock washer (8).
4. Repeat procedure for second unistrut bracket (1)
Figure 2-22. Preparing the Pole Bracket
5. Position unistrut bracket (1) with pipe
blocks (11) against the mounting pole,
slide the pipe blocks (11) until they
contact the mounting pole.
6. Ensure the pipe blocks (11) are centered to the unistrut brackets (1).
7. Tighten the hardware.
2-24