Lna assembly, 7 lna a – Comtech EF Data CSAT-6070 User Manual
Page 52
Advertising
50 Watt Model C-Band Transceiver
Revision 0
Installation
MN/CSAT607050.IOM
2.7 LNA A
SSEMBLY
Refer to Table 2-11, Figure2-15 and Figure 2-26.
Install assembled Redundant LNA assembly, as follows:
Figure 2-26.
Installation of the Redundant LNA
Assembly.
1. Remove the protective cover from the antenna OMT.
2. Install the appropriate gasket (Kit AS/0461, Figure 2-15) on the antenna end
of the TRF.
a. If only one of the mounting surfaces has a groove, use the half-thick
gasket.(2)
b. If both mounting surfaces have grooves, use the full thick gasket (5).
3. Position the LNA switch assembly (with gasket) in place on the antenna and
fasten using the supplied hardware (1, 2-6, 4, 3)
2-28
Advertising