Digital Alert Systems DASDEC-II QUICK START UP GUIDE - Manual (Page 23)

Quick Start Guide for Your DASDEC II
Page 23 of 40
4) The drop-down box is used to set how long non-national alerts, such as Required Monthly
Tests and weather alerts, will be held before being forwarded. “As soon as possible” is the
default meaning as soon as an alert has finished being decoded it will be sent.
5)
Below that, there are several check boxes that will affect how the DASDEC-II handles
decoded alerts. For more in-depth explanation of each option refer to the manual. All of
these options can be used to configure your DASDEC exactly how you want it to decode
alerts. It is recommended you analyze each option and only use the options that you know
will give you the exact outcome you want.
6) Under the heading Configure Auto or Manual Forwarding Operation are the global
controls for enabling Auto-Forward Mode. If you will have any stations that you will want to
auto-forward alerts then the check box turning on “Auto-Forward Mode” must be checked.