DNF Controls 2034CL-L-PBIO VS.3.0 - Manual (Page 11)

11 2034CL-L, Vs.3.0, 300 Clip Instant Access System, Louth Protocol, PBIO
Option
7. RECALL
a. RECALL ON THE SHOTBOX
Select the desired Cue Point by pressing the BANK and ShotKey.
The ST300 will automatically load the Learned clips on the Learned VTRS, cue the clips
to the Learned time, then set the Learned GANG mode.
b. RECALL ON THE PRODUCTION SWITCHER
Recall the desired REGISTER NUMBER.
The ST300 will automatically load the Learned clips on the Learned VTRs, cue the clips
to the Learned time, then set the Learned GANG mode.
c. RECALL ON THE ST300
1)
Select the desired Cue Point by pressing [NEXT CUE], [LAST CUE] or by
manually entering the Cue Point using the numeric keypad.
The selected Cue Point number is shown on the bottom line of the display.
2) Press
[LOAD] on the ST300.
The ST300 will automatically load the Learned clips on the Learned VTRs, cue
the clips to the Learned time, then set the Learned GANG mode.
8. SHOTBOX SHOTKEY MAPPING TO SHOTLIST
LOCATIONS
The SWITCHES on the SHOTBOX access the SHOTLIST locations as follows:
BANK 0, SWITCHES 1 Æ 30 access SHOTLIST locations 001 to 030.
BANK 1, SWITCHES 1 Æ 30 access SHOTLIST locations 101 to 130.
BANK 2, SWITCHES 1 Æ 30 access SHOTLIST locations 201 to 230.
BANK 3, SWITCHES 1 Æ 30 access SHOTLIST locations 301 to 330.
BANK 4, SWITCHES 1 Æ 50 access SHOTLIST locations 401 to 430.
BANK 5, SWITCHES 1 Æ 30 access SHOTLIST locations 501 to 530.
BANK 6, SWITCHES 1 Æ 30 access SHOTLIST locations 601 to 630.
BANK 7, SWITCHES 1 Æ 30 access SHOTLIST locations 701 to 730.
BANK 8, SWITCHES 1 Æ 30 access SHOTLIST locations 801 to 830.
BANK 9, SWITCHES 1 Æ 30 access SHOTLIST locations 901 to 930.