DNF Controls 2034CL-L-PBIO VS.3.0 - Manual (Page 16)

16 2034CL-L, Vs.3.0, 300 Clip Instant Access System, Louth Protocol, PBIO
Option
13. RECUE THE CURRENTLY LOADED CLIP
a. Press
[RECUE] to reload the currently loaded clip to the IN point.
b. Press
[SHIFT] + [RECUE].
The display will show: “xx:xx:xx:xx”
(Where xx:xx:xx:xx = Last entered RECUE time.)
“Enter RECUE time”
Enter the time using the ST300’s numeric keypad.
Press [ENTER] to reload the currently loaded clip at the entered time.
OR
Press [ESC] to exit without searching.
14. VIEW THE CLIP ID OF THE CURRENTLY LOADED
CLIP
a.
Press and hold [SHIFT], then press and release [LOAD].
b.
The bottom line will show: “Loaded Clip: xxxxxxxx”
where xxxxxxxx is the CLIP ID.