DNF Controls 2034CL-L-PBIO VS.3.0 - Manual (Page 17)

17 2034CL-L, Vs.3.0, 300 Clip Instant Access System, Louth Protocol, PBIO
Option
15. VIEW CONTENT OF CUE POINTS ON THE
SHOTBOX
a. Press
[VIEW]. The VIEW indicator comes on.
b.
Press the switch for which you would like to see the content.
c.
The switch turns RED and the content (CLIP ID) of the corresponding Cue Point is
displayed on a virtual display.
For
Example:
Note: All the remaining switches are not illuminated.
d.
Release the keys to return to normal operation.
16. SHOTBOX CONTROL SWITCHES
a. [PLAY]: Plays out the selected clip.
b. [RECUE]: Returns to the beginning of the clip.
c. [STOP]: Stops playout of the clip.
17. CLEAR SINGLE CUEPOINT
On the Shotbox, press [SHIFT] + the Shotkey, the content of which you wish to clear.
The Shotkey becomes blank, the corresponding cuepoint is cleared.
VTR 1
Clip 23
VTR 2
Clip 13 VTR 3
Clip 77 VTR 4
No Assignment