equinux VPN Tracker 8.1.1 - Manual (Page 19)

Importing Connections
Find out how to import a connection that you have been
given by your IT department or VPN administrator.
Prerequisites
Before importing a connection, make sure VPN Tracker is installed. If you have
not yet downloaded or installed VPN Tracker, or if you haven’t activated your
license yet, please follow
→ Getting Started first.
Import Your Connection(s)
‣ Locate the connection in Finder and double-click it. Or open VPN Tracker
and choose “File > Import > VPN Tracker Connection…” from the menu.
‣ You will be asked for the import password. If you don’t know the import
password, please ask the person who gave you the connection.
Replacing Existing Connections
If you already have the connection you’re about to import, you’ll be asked
whether to replace your existing connection, or if you would prefer to add this
connection as a copy:
Replacing a connection
If your new connection replaces your existing connection, click “Replace”. Your
existing connection will be overwritten.
Adding a copy
If you would prefer to keep your existing connection and import the new
copy, click “Add Copy”.
You’ll find the imported connection further
down in your connection list. It will have the
word “copy” appended to its name, e.g. “Office
copy”.
Replacing an Existing Secure Desktop
Connection files can also include Secure Desktops. If the included Secure
Desktop already exists, you will once again be asked whether you would pre-
fer to replace your existing Secure Desktop or add a the new Secure Desktop
as a copy.
19