equinux VPN Tracker 8.1.1 - Manual (Page 20)

Connecting to Your New VPN
When you’re done setting up your VPN, you’re ready to
connect. To test your VPN, go to a location outside of the
network that you want to connect to.
Connecting
Click the on/off slider to connect the VPN.
If you are using VPN Tracker for the first time with your current Internet con-
nection, it will test your connection. Wait for the test to complete.
If prompted, enter your pre-shared key and Extended Authentication (XAUTH)
user name and password.
Connected?
Connecting may take a couple of seconds. If the On/Off button turns blue
that’s great – you’re connected!
Continue with the chapters → Secure Desktop and → Working with VPN
Tracker to find out how to use your VPN connection.
Problems?
If there is a problem connecting, VPN Tracker will give you helpful advice and
troubleshooting tips. To learn more about troubleshooting VPN connections,
visit the chapter
→ Troubleshooting
20