3 control modules, 2 controls cover subassembly remounting – Flowserve QX Limitorque User Manual
Page 57
Advertising
57
Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11
flowserve.com
Figure 6.4 - Controls Cover Subassembly
6.2.2 Controls Cover Subassembly Remounting
Step 1
Lightly lubricate ‘O’-ring (#7-21) and install around controls cover spigot/pilot (#7-17). Connect all wiring (See section
7 for wiring connection locations). Slide controls cover spigot/pilot into the unit housing insuring not to pinch wiring.
Step 2
Fit the 4 screws (#15-6) into controls cover mounting holes and tighten to torque in section 2.
6.3 Control Modules
Table 6.5 - Control Module Assembly
ITEM NUMBER
DESCRIPTION
QTY.
14-8
CONTROLS SUBASSEMBLY
1
14-9
SOCKET HEAD CAP SCREWS
3
14-11
BRACKET, CONNECTOR RETAINER
1
14-12
SOCKET HEAD CAP SCREWS
1
Advertising