Fluke Biomedical 07-444 - Manual (Page 16)

Nuclear Associates 07-444
Operators Manual
4-2
4.1 Entering a Facility Title
This procedure allows the user to enter an alphanumeric string of characters for the Facility Title. The
entered title is printed each time data output is sent to a printer.
1. Press or to scroll through the Setup Menu labels until Facility Title is displayed.
Figure 4-1. Setup Menu
2. Press ENTER. The current title, with a cursor under the first character, will be displayed. If no title
is stored, you will see [_________________________].
3. To Enter/edit the Facility Title the following steps are followed:
a. Press or to scroll through the available character set.
b. Press ENTER to select the displayed character; the cursor will move to the next
character.
c. Repeat Steps a and b as required to enter up to 20 characters, including spaces.
After the 20th character is selected, by pressing
ENTER, the display will return to the Setup Menu
and Exit Setup Menu will be displayed.
4.2 Clearing the Data Log
This procedure clears the data log of all stored information.
1. Press or to scroll through the Setup Menu labels until Clear Data Log is displayed.
2. Press ENTER. The following message will be displayed:
Clearing Data...
3. After a few seconds, the display will return to the Setup Menu and Calibrate will be displayed.
Step
Wedge
Type
Graphics
Set-up
(fig. 4-4)
NAD Step Wedge
XRITE Step Wedge
Enter
Enter
Single
Exit Setup
Menu
Facility
Title
Calibrate
Enter
Autozero
Screen
ENTER
to Read
Density =
x.xx
Scanning
Mode
Enter
Facility
Title Screen
Calibrating
Done.
Calibrating...
Enter
Density
Screen
Autozeroing...
Enter to
Read
Enter Enter Enter
Clear
Data
Log
Comm.
Fig. 4-2
Log
Setup
Fig. 4-3
Clearing
Data...
Sending
Data
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Send All
Data
Enter
NOTE