Fluke Biomedical 07-444 User Manual
Page 18
Nuclear Associates 07-444
Operators Manual
4-4
Output Mode
In the Manual Mode, data is transmitted upon user command to send data; in the Automatic Mode, data is
transmitted upon completion of the measurement cycle.
1. Press or to scroll through the Communications Menu until Output Mode is displayed.
2. Press ENTER. The currently selected output mode will be displayed.
3. Press or to scroll through the available output modes (Automatic or Manual).
When Automatic is the selected mode, user
temperature entry is not permitted, regardless of
whether it is enabled/disabled from the Log Setup
Menu.
4. Press
ENTER to select the displayed output mode. The display will return to the Communications
Menu and Baud Rate will be displayed.
Baud Rate
1. Press or to scroll through the Communications Menu until Baud Rate is displayed.
2. Press
ENTER. The currently selected baud rate will be displayed.
3. Press or to scroll through the available baud rates (9600, 1200, 2400, and 4800).
4. Press
ENTER to select the displayed baud rate. The display will return to the Communications
Menu and Parity will be displayed.
Parity
1. Press or to scroll through the Communications Menu until Parity is displayed.
2. Press
ENTER. The currently selected parity will be displayed.
3. Press or to scroll through the available choices (None, Space, Mark, Even, and Odd).
4. Press
ENTER to select the displayed parity. The display will return to the Communications Menu
and Word Length will be displayed.
Word Length
1. Press or to scroll through the Communications Menu until Word Length is displayed.
2. Press
ENTER. The currently selected word length will be displayed.
3. Press or to scroll through the available choices (7 bits or 8 Bits).
4. Press
ENTER to select the displayed word length. The display will return to the Communications
Menu and Handshaking will be displayed.
Handshaking
1. Press or to scroll through the Communications Menu until Handshaking is displayed.
2. Press
ENTER. The currently selected choice will be displayed.
3. Press or to scroll through the available choices (DSR Required or DSR Ignored).
4. Press
ENTER to select the displayed choice. The display will return to the Communications Menu
and Exit Com. Menu will be displayed.
NOTE