Fluke Biomedical 07-444 - Manual (Page 39)

Operation
Reporting Logged Data
5
5-5
6. Press ENTER. The following message will be displayed:
Sending Data...
7. When transmission is complete, the File No. and Name will be re displayed.
8. Repeat Steps 1 through 7 to output data from other files as necessary.
5.5 Printing a D Log E Curve
The Little Genius allows the user to output a D Log E curve directly to a printer. See the D log E Setup
section for further description.
1. Press or to scroll through the menu until Select Log Entry is displayed. Press ENTER.
2. The active file will be displayed as File XX or a previously entered user label. Press or to scroll
through the file list and press ENTER to select the displayed file.
3. Entry selected... will be displayed, followed by the currently active file. Press or to scroll through
the menu until Print D Log E is displayed. Press ENTER.
4. The message Sending data... will be displayed.
5.6 Printing Control Charts
The Little Genius allows the user to output the control charts directly to a printer. See the Control Chart
Setup section for further description.
1. Press or to scroll through the menu until Select Log Entry is displayed. Press ENTER.
2. The active file will be displayed as File XX or a previously entered user label. Press or to scroll
through the file list and press ENTER to select the displayed file.
3. Entry selected... will be displayed, followed by the currently active file. Press or to scroll through
the menu until Print Ctrl Chart is displayed. Press ENTER.
4. The message Sending data... will be displayed.