Fluke Biomedical 07-444 - Manual (Page 6)

Nuclear Associates 07-444
Operators Manual
1-2
Aperture Size 1.0 and 2.0 mm
Operating Conditions 10°C to 40°C (50°F to 104°F)
Maximum humidity of 90% non-condensing
Dimensions (H x W x D) 2.75 in x 3.2 in x 7.1 in (7 cm x 8.1 cm x 18 cm)
1.3 Receiving Inspection
Upon receipt of the unit:
1. Check the shipping carton(s) and their contents for in-shipment damage. If damage is evident, file
a claim with the carrier and notify Fluke Biomedical at 440.248.9300.
2. Check that all items listed on the packing slip are present and in good condition. If any items are
missing or damaged, contact Fluke Biomedical at 440.248.9300.
1.4 Storage
If necessary to store the unit prior to use, pack it in the original container(s), if possible, and store in an
environment free of corrosive materials, fluctuations in temperature and humidity, and vibration and
shock.
1.5 Routine Cleaning
Do not immerse the Model 07-444 Miniscan Scanning Densitometer. The unit is not waterproof. Liquid
could damage the circuits. The unit should be kept clean and free from dirt and contamination. The unit
may be cleaned by wiping with a damp cloth using any commercially available cleaning or
decontaminating agent.
1.6 Procedures, Warnings, and Cautions
The equipment described in this manual should be used only by persons who have been trained in the
proper interpretation of its readings.
Although the equipment described in this manual is designed and manufactured in compliance with all
applicable safety standards, certain hazards are inherent in the use of electronic and radiometric
equipment.
WARNINGS and CAUTIONS are presented throughout this document to alert the user to potentially
hazardous situations. A WARNING is a precautionary message preceding an operation that has the
potential to cause personal injury or death. A CAUTION is a precautionary message preceding an
operation that has the potential to cause permanent damage to the equipment and/or loss of data.
Failure to comply with WARNINGS and CAUTIONS is at the user's own risk and is sufficient cause to
terminate the warranty agreement between Fluke Biomedical, Radiation Management Services and the
customer.
Adequate warnings are included in this manual and on the product itself to cover hazards that may be
encountered in normal use and servicing of this equipment. No other procedures are warranted by Fluke
Biomedical. It shall be the owner's or user's responsibility to see to it that the procedures described here
are meticulously followed, and especially that WARNINGS and CAUTIONS are heeded. Failure on the
part of the owner or user in any way to follow the prescribed procedures shall absolve Fluke Biomedical
and its agents from any resulting liability.