Fluke Biomedical 601PRO XL User Manual
601pro, International safety analyzer, Operators manual
Advertising
Table of contents
Document Outline
- 601ProXL International Safety Analyzer Operators Manual
- 1. Introduction and Description
- 2. Setting Up the 601PRO
- Using Factory Default Settings
- Selecting the Test Standard
- Selecting the Printer Output
- Selecting the RS232 Baud Rate
- Activating the Beeper
- Setting the Time and Date
- Configuring the Enclosure Leakage for the Auto Mode Sequence
- Selecting Language Options
- Selecting the DC Option
- Selecting the Auto/Step Tests: Controlled Power Sequences or 601CE Conventional Test Sequences
- Enabling Stop on Failure
- Configuring for Device Records or Templates
- 3. Manual Mode
- Connecting the Device Under Test
- The Power-Up Sequence
- Selecting the Test Standard
- Selecting the Class/Type
- Saving Standard, Class, Type and Test Current
- Using View Present Settings
- Lead Type Definitions
- Manual Operation
- Additional Features
- Shortcut Key 0: Mains Voltage Test and Dual Lead Voltage Test
- Shortcut Key 1: Current Consumption Test
- Shortcut Key 2: Insulation Resistance Test
- Shortcut Key 3: Protective Earth Resistance Test
- Shortcut Key 4: Earth Leakage Test
- Shortcut Key 5: Enclosure Leakage Test
- Shortcut Key 6: Patient Leakage Current Test (IEC 601-1 or VDE 751-1 Test Standard)
- Shortcut Key 7: Mains on Applied Part Leakage Test (IEC 601-1)
- Shortcut Key 8: Patient Auxiliary Current Test
- Shortcut Key 9: IEC 1010 Accessible Voltage/Leakage Test
- Shortcut Key /: VDE Equivalent Device Leakage Test
- Shortcut Key - : VDE Equivalent Patient Leakage Test
- ECG Output
- 4. Auto/Step Modes
- 5. Test Records
- 6. Device Records and Templates
- Setup Requirements
- Using the Device Information Record Utility
- Connecting the 601PRO and the Host Computer
- Sending Device Information Records from the 601PRO to the Host Computer
- Receiving Device Information Records from the Host Computer
- Device Information Record: Definition of Fields
- Device Information Record Format
- Deleting Device Records and Templates
- 7. Testing Devices
- 8. Standards and Principles
- Accessing System Setup
- Selecting the Test Standard
- Referring to Test Limits for the Selected Standard
- VDE 701 and VDE 751-1
- Automatic Operation
- IEC 601-1 Controlled Power Sequence and Test Limits for Auto and Step Tests
- IEC 601-1 Conventional Test Sequence and Test Limits for Auto and Step Tests
- AAMI Controlled Power Sequence and Limits
- IEC 1010 Controlled Power Sequence and Limits (Reflects IEC 61010-1 Second Edition, 2001-2002)
- HEI 95 Controlled Power Sequence and Test Limits for Auto and Step Tests
- HEI 95 Conventional Test Sequence and Test Limits for Auto and Step Tests
- AS/NZS 3551 Controlled Power Sequence and Test Limits for Auto and Step Tests
- Test Principle: Protective Earth Resistance
- Test Principle: Earth Leakage Current
- Test Principle: Enclosure Leakage Current
- Test Principle: Mains Insulation Resistance
- Test Principle: Applied Part Insulation Resistance
- Test Principle: Mains on Applied Part
- Test Principle: Patient Auxiliary Current
- Test Principle: Patient Leakage Current
- Test Principle: VDE, Equivalent Device Leakage
- Test Principle: VDE, Equivalent Patient Leakage
- Test Principle: Accessible Voltage
- Test Principle: Accessible Leakage Current
- 9. Custom Standards
- 10. Computer Control
- 11. Error Messages, Troubleshooting, and Support
- Appendices