Safety information – Fluke Biomedical ProSim 4 User Manual
Page 12
ProSim™ 4
Users Manual
2
Safety Information
In this manual, a Warning identifies hazardous conditions and actions that could
cause bodily harm or death. A Caution identifies conditions and actions that
could damage the Analyzer, the equipment under test, or cause permanent loss
of data.
Warnings
To prevent personal injury, use the Product only as specified,
or the protection supplied by the Product can be compromised.
To prevent possible electrical shock, fire, or personal injury:
•
Do not use and disable the Product if it is damaged.
•
The battery door must be closed and locked before you
operate the Product.
•
Remove all probes, test leads, and accessories that are not
necessary for the measurement.
•
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
•
Do not use the Product if it operates incorrectly.
•
Do not connect the Product to a patient or equipment
connected to a patient. The Product is intended for
equipment evaluation only and should never be used in
diagnostics, treatment, or any other capacity where the
Product would come in contact with a patient.
•
Read all safety Information before you use the Product.
•
Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
•
Carefully read all instructions.