Fluke Biomedical ProSim 4 - Manual (Page 34)

ProSim™ 4
Users Manual
24
How to Show Instrument Information in the Display
To show the Product information in Figure 21 in the display, touch the
Instrument Information control in the Setup screen.
gne016.bmp
Figure 21. Instrument Information Screen
Note
Firmware version shown is for illustration only and may not match
the latest firmware.
Touch Back to go back to the Setup screen. Touch the Home softkey to go back
to the Home screen.
Maintenance
The Product is a calibrated measurement instrument. Try to prevent mechanical
abuse that could change the calibrated values. The Product has no internal user-
serviceable parts.
 Warnings
For safe operation and maintenance of the Product:
• Do not keep cells or batteries in a container where the
terminals can be shorted.
• Connect the battery charger to the mains power outlet
before the Product.
• Repair the Product before use if the battery leaks.
• Remove batteries to prevent battery leakage and damage to
the Product if it is not used for an extended period.
• Keep cells and battery packs clean and dry. Clean dirty
connectors with a dry, clean cloth.
• Do not short the battery terminals together.
• Use only Fluke Biomedical approved power adapters to
charge the battery.