Fluke Biomedical ProSim 4 - Manual (Page 27)

Vital Signs Simulator
Non-Invasive Blood Pressure Simulation and Tests
17
When the time expires, the leak rate is shown in the display. See Figure 11.
gne025.bmp
Figure 11. Leak Test Results Screen
Touch the Home softkey to go back to the Home screen.
How to Check a Manometer
To check a manometer, connect the Product to the manometer and manual
pump bulb as shown in Figure 12.
ProSim 4
Squeeze
Pressure Pump
Blood Pressure
Gauge
gne024.eps
Figure 12. Manometer Check Connections
1. Touch the More softkey.
2. Touch the Leak Test and Manometer control to show the screen shown in
Figure 10 in the display.
3. Squeeze the manual pump bulb to pressurize the line.
4. Check the value shown on the pressure gauge against the measurement in
the Product display.
Relieve the pressure through the pump relief valve before you remove the hose
from the Product.