Fronius Selectiva 8 kW - Manual (Page 44)

42
If the lamp circuit is potential-free, then the switching current must not exceed 4 A. A lamp
that is actuated by the 230 V supply relay must be operated with an output current of max.
1 A.
Immobiliser If the charger is built into the vehicle as an on-board device, then the optional immobiliser
will prevent the vehicle from being started unintentionally whilst charging is taking place.
This protects the vehicle, the battery and the charger leads from damage.
As soon as the vehicle is connected up to the mains supply, the corresponding relay picks
up and blocks the ignition signal for instance. Another example is the actuation of a suitable
signal lamp to convey the message visually that charging is currently in progress.
Battery cooled
down The corresponding relay switches automatically once the time set in the menu has passed.
External air pump
- electrolyte circu-
lation This option enables an external air pump to be activated by a relay contact in the sense of
the "electrolyte circulation" option.
LED strip The LED strip acts as a status indicator and lights up in the same colours as the display
elements on the control panel. An LED strip including a diffuser is installed in the gap be-
tween the front wall and upper part of the housing.
Floor bracket The robust floor bracket ensures safe fitting on site. More information can be found in the
corresponding fitting instructions.
Wall bracket The robust wall bracket ensures safe fitting on site. More information can be found in the
corresponding fitting instructions.
"Mobile" kit A carrying strap and handle improve the mobility of the device.
RCS 3.0 remote
indication The remote indication allows the device to be fully controlled from a distance of up to 30 m
(98 ft., 5.1 in.). This option includes a full control panel in an aluminium housing that pro-
vides IP42 protection.