FSR DV-HMSW-88 8x8 MATRIX - Manual (Page 6)

6
1.4 FRONT PANEL

Main power switch: matrix power on/off

Config key: product ID set from 1 to 8

Preset key: save preset (up to 16 presets)

Select key: select number

Input key: select channel from 1 to 8

Output key: select channel from 1 to 8

Enter key: save current selection

Cancel key: cancel current selection

Create key: change input/output channel

Preview key: preview the status of current connection

EDID key: read EDID data from display and then save data to matrix, which is connected to output ports

IR: receive infrared ray from remote controller

Reset key: initialize the matrix
1.5 BACK PANEL

POWER Connector: 12V DC. Power

9 Pin D-Sub Connector: RS-232C

LAN Port: Ethernet

Dip Switch: Product ID Setup (1~99)

Output LED: Indicate output status

Input Rotary Switch: Set up EDID mode
 0: Manual set up mode
 1: 720p& 1080i , 2ch audio
 2: 1080p , 2ch audio
 3: 1080p , multi ch audio
 4: WUXGA (DVI mode)
 5~9:
Reserved