GAI-Tronics 13363 Addressable Amplified Speakers Installation and Operation Manual - Manual (Page 14)

Pub. 43004-034F
Model 13353, 13363, and 13373 Addressable Amplified Speakers Page 9 of 52
e:\radio products-current release\43004\43004-034f\43004-034f.doc
03/15
General Information
Product Overview
The GAI-Tronics Model 13353, 13363 and 13373 Addressable Amplified Speaker Assemblies are
designed for remote paging in temporary or permanent applications such as campuses, public gathering
locations, construction sites, or amusement parks.
Features
 Hardwired (600-ohm) and RF audio delivery
to speaker amplifier.
 One-way public address broadcasts.
 A high-efficiency (>80%) Class D amplifier
to provide up to 8 watts into an 8-ohm load
(116 dB SPL, measured at 1 meter on axis).
 Generic Operation - (common broadcast)
using input contact closure.
 Selective Operation - addressability for
individual unit, group/zone, or system-wide
broadcasts using DTMF or 2-Tone signaling
access.
 Remote volume control using DTMF
signaling.
 Automatic Level Adjustment automatically
adjusts volume during varying levels of
ambient noise.
 Universal ac input power supply provided.
 Battery trickle charge during normal operation
(battery optional).
 Programmable output control for strobe activation.
 PC programmable using the CARD Suite Programming Software Application.
Available Models
Part No. Description
13353 Hardwired 600-ohm audio input
13363 Hardwired 600-ohm input and/or VHF radio receiver input (136–174 MHz)
13373 Hardwired 600-ohm input and/or UHF radio receiver input (450–470 MHz)
Figure 1. Addressable Amplified Speaker Assembly