GAI-Tronics 13363 Addressable Amplified Speakers Installation and Operation Manual - Manual (Page 54)

Pub. 43004-034F
Model 13353, 13363, and 13373 Addressable Amplified Speakers Page 49 of 52
e:\radio products-current release\43004\43004-034f\43004-034f.doc
03/15
Model BB133 Battery Backup Kit
The Model BB133 Battery Backup Kit provides up to 2 hours of continuous output (full power) if main
power is lost or disconnected. The kit includes a bracket, Model 40201-010 2.8 Ah battery, and a single
mounting screw. Refer to Pub. 43003-036 for installation details.
Model 12506-001 Remote Volume Control Assembly
The Model 12506-001 Remote Volume Control Assembly allows local, mechanical control of the
speaker’s output volume. As previously stated, this is a passive adjustment. In this application, the
maximum output level is defined by the CARD Suite program. The Local Volume Adjustment can only
adjust the output level lower than the maximum programmed level. Refer to page 43 for installation
instructions.
Model 190-002PS Weatherproof Power Supply Kit
The Model 190-002PS Weatherproof Power Supply Kit is designed for mounting to the bottom of an
Addressable Amplified Speaker. The kit includes a 2-gang weatherproof electrical box, 15 V dc power
supply (adjustable), mounting bracket, 3-inch pipe nipple, ½-inch NPT conduit hub, tamper-resistant
hardware, and security bit (T15 Torx). Refer to Figure 20 and Figure 21 and Pub. 43003-045 for
installation details.
Figure 20. 190-002PS Mounting Details