Gasboy M09677B015 User Manual
Page 20
Advertising
![background image](/files/787402/content/doc020.png)
Installing the NR-H Nozzle Reader (M09677B015) Kit
Page 20
MDE-5075 NR-H Nozzle Reader (M09677B015) Kit Installation Instructions · January 2013
24
Double-back the tip of the clamp into the RT slot and snuggly tighten the clamp with a
screwdriver until the clamp visibly compresses the RT and mounting foot. Remove the tie
wrap in the other RT slot and replace it with the second hose clamp in the same way as the first
as shown in
. After completing, the RT must look like
.
Figure 27: Tightening Hose Clamps
Figure 28: Completed Assembly
The installation of NR-H Nozzle Reader (M09677B015) kit is now complete.
Hose Clamp
Advertising