Gasboy M09677B015 - Manual (Page 7)

MDE-5075 NR-H Nozzle Reader (M09677B015) Kit Installation Instructions · January 2013 Page 7
Installing the NR-H Nozzle Reader (M09677B015) Kit
Installing the NR-H Nozzle Reader (M09677B015) Kit
To install the NR-H Nozzle Reader (M09677B015) Kit, proceed as follows:
1 If attached, remove nozzle boot as shown in Figure 2 .
Figure 2: Removing Nozzle Boot
2 Secure the bushing tang with a bushing tang screw as shown in Figure 3 .
Figure 3: Bushing Tang and Screw Assembly
Orientation of Bushing Tang