Gasboy M09677B015 - Manual (Page 9)

MDE-5075 NR-H Nozzle Reader (M09677B015) Kit Installation Instructions · January 2013 Page 9
Installing the NR-H Nozzle Reader (M09677B015) Kit
5 Tighten screws until just flush with top surface of antennae as shown in Figure 6 . DO NOT
OVER-TIGHTEN as it will strip the threads.
Figure 6: Antennae Screw
6 Measure the unstretched conduit to be 2-3 inches shorter than the antennae cable as shown in
Figure 7 , and then cut it as shown in Figure 8 on page 10 .
Figure 7: Measuring Unstretched Conduit
Screw
Conduit