Gasboy FiPay Server Retrofit Kit for 8-hose Islander - Manual (Page 25)

MDE-5045 FiPay™ Server Retrofit Kit for 8-hose Islander Installation Guide · January 2013 Page 25
Installing the FiPay Server and Additional Hardware Components in the 8-hose Islander PLUS System
41 Insert all the three Ethernet cables into the bottom wire clip and snap shut (see Figure 33 on
page 24 ).
42 Tie the LAN 2 Ethernet cable to the LAN 1 Ethernet cable of the OrCU using a cable tie.
Figure 34: Tying the Ethernet Cables
Cable Tie
43 Secure the Server bracket using two staycons and a zip tie, to keep it from moving (see
Figure 35 ).
Figure 35: Securing the Server Bracket
The installation of the FiPay Server and additional hardware components in the 8-hose
Islander PLUS system is now complete.