Gasboy MCE300 - Manual (Page 55)

GASBOY MCE 300
9-4 03/07/03
B COMMAND MESSAGES
LABEL NOT FORMATTED - The configuration is not loaded to allow the printing of labels. The B
command was automatically aborted. Load the label portion of the configuration.
NO DATA IN CARD FILE - There is no data loaded in the card data file for labels to be printed.
The B command was automatically aborted. Load the card data file.
NO PRINTER ON LINE! - The unit was unable to print on the label printer because the printer was
not in the on-line mode. The B command was automatically aborted.
LAST CARD IN FILE - The unit was unable to respond to a "Line feed" character and move to the
next card because this was the last card in the file. The B command was automatically
stopped.
LABELS PRINTED - The labels have been successfully printed. The B command was
automatically stopped.