Gasboy FuelOmat Payment Terminal - Manual (Page 49)

OrPT Manual 39
WD Communications
Parameter Name Required Value Remark
TCP Send Allow (Enabled) or prevent (Disabled)
the device from checking the TCP/IP
link in the Transmission mode after
power failure. Default: Enabled
TCP Send Timeout If TCP Send is enabled, determine the
Timeout (in Seconds) before
attempting to communicate. Default: 45
TCP Receive Allow (Enabled) or prevent (Disabled)
the device from checking the TCP/IP
link in the Reception mode after
power failure. Default: Enabled
TCP Receive Timeout If TCP Receive is enabled, determine
the Timeout (in Seconds) before
attempting to communicate. Default: 45
General
Parameter Name Required Value Remark
SAM Cards Indicates the number of SAM cards
installed in the device.
Card Reader Indicates the type of card reader: insert
or swipe.
Direction Direction of reading card reader.
Track Type Type of track on the card.
Display Type