innovaphone IP222 - Manual (Page 11)

Bedienungsanleitung IP-Telefon IP222 / IP232 - 9 -
- 9 -
2.3. Switching between calls
You can switch between two connections using the hold and retrieve function.
1. Set up an active call and a call on hold.
2. Press the Consultation key R twice or the consultation key "R" and the number "2".
The active call is put on hold and the call on hold is activated.
3. To terminate the active call, you must press the Clearing key. The connection to
the active call is terminated. The call on hold automatically becomes the active call.
2.4. Call back
An automatic call back or automatic redialling can be initiated if no-one answers the call
or if you hear the busy tone.
2.4.1 Call back on busy
Automatic call back can be initiated if the other party is busy. As soon as the party
called has ended their call, the IP telephone indicates that the line is free again. As soon
as you pick up the handset, the call is initiated and the other telephone rings.
1. Press the menu key in the middle of the navigation key if you hear the busy tone.
2. Press the function key beside the call back line on the screen and hang up to
activate the automatic return call. Wait for the call back signal.
3. When the call back is signalled on your IP telephone:
Pick up the handset or press the Loudspeaker key to initiate the recall. The call is set
up. Press the Clearing key if you don't want to set up the recall. The call is not set up
and is deleted from the list of active recalls.
2.4.2 Call back on no reply
Automatic call back can be initiated if the called party does not answer your call.
As soon as the called party has used the telephone, the IP telephone rings to indicate
that the subscriber is now available. As soon as you pick up your telephone’s handset,
the call is initiated and the other telephone rings.
1. Press the Menu key if you hear the distant dial tone.
2. Resume the procedure as described in chapter 2.4.1.