innovaphone IP222 - Manual (Page 20)

Bedienungsanleitung IP-Telefon IP222 / IP232 - 18 -
- 18 -
5.4. Call waiting
1. This function allows you to control call waiting while engaged in a telephone call.
2. In the initial state, press the following keys: Menu key in the middle of the
navigation key and the function key next to User Setup.
3. Use the function key next to Call Waiting, to confirm your choice between the
following call waiting states:
Off The call waiting function is switched off. The caller receives a busy
signal and the called party receives no call-waiting signal.
On (once) A call-waiting tone sounds once.
On (mute) No call-waiting tone; you only receive a visual notification of a new call
on the screen.
On (default) Call waiting duration and signal are in accordance with the country-
specific standard.
Press ESC and you will be required to save your entry.
5.5. Calling line identification presentation (CLIP)
This function is used to switch the calling line identification presentation feature for
outgoing calls on or off. The setting applies for all subsequent calls, in so far as settings
are not made for individual calls.
1. In the initial state, press the following keys: Menu key in the middle of the
navigation key and the function key next to User Setup.
2. Use the function key next to Number Presentation to switch this feature on or off.
3. Press ESC and you will be required to save your entry.
Phone Setup menu 6.
The Phone Setup menu relates to the IP telephone hardware, irrespective of the user.
6.1. Headset
Before installing the headset please check whether the innovaphone telephone
supports it. The current list of compatible headsets can be found in the innovaphone
Wiki under:
http://wiki.innovaphone.com
Hardware
Plug your headset's USB connector into a free USB slot on the IP telephone. It is not
necessary to install the computer software. The computer software only needs to be