Q-See QSTC201 - Manual (Page 10)

QSTC201/211 IP-CAMERA USER MANUAL
10
Fig 2 Fig 2 Fig 2 Fig 2----3333 Connect to alarm box Connect to alarm box Connect to alarm box Connect to alarm box
Connection parameter descriptions:
Name Description
GND Grounding
NC Normally Closed Alarm output
NO Normally Open Alarm output
5V 5V Power port
COM Public port used with NC or NO，connect to alarm output
Alarm IN Sensor input
3. 3. 3. 3. Check the Night Vision IR LEDS
Power on, the IP-CAMERA starts to work; user can see a circle of lights around
the LENS of IP-CAMERA which allow the user to view images clearly in the dark.
After the power is on, the IP-CAMERA starts to work.
2.3 Install CMS
After the IP-CAMERA is connected to the Ethernet, user can begin remote
monitoring and managing the device by using the client software or IE browser.
This chapter explains how to use the client software, and is the quick install
guide for the CMS. For operation and monitor setting details please refer to the
CMS user manual on the included CD.
Note: Before installing control center software in your computer, please