Q-See QSTC201 - Manual (Page 31)

QSTC201/211 IP-CAMERA USER MANUAL
31
Parameter Meaning
Frame rate Max 30 fps Max 15 fps
Video quality The quality of video image
5.4 Alarm configuration
Alarm configuration includes seven submenus: motion detection, motion alarm,
motion schedule, sensor alarm, sensor schedule, other alarm and alarm out.
5.4.1 Motion detection
1. Enter into “Alarm configuration"--"Motion detection" refer to Figure 5-7:
2. Select the channel to set motion detection parameters at the "Channel
Number" pull down list.
3. Move the "Sensitivity" scroll bar to setup the motion detection sensitivity.
4. Select the "Add” option, press the "Ctrl" button and move mouse to select the
motion detection area; select the “Erase” option, move the mouse to clear all
motion detection areas.
5. Press the "Save" button to save the settings.
Fig 5-7 alarm configuration-- motion detection interface
5.4.2 Motion alarm
1. Enter into “Alarm configuration"-- "Motion alarm" refer to Figure 5-8:
2. Select "Enable alarm" check box, all functions under this interface will be
activated.
3. Select "Alarm output" in the "trigger alarm out” text box, it will trigger alarm if
the device connected to alarm is triggered.
4. Select "Trigger snap”, user should also select a matched channel; the alarm