Q-See QSTC201 - Manual (Page 34)

QSTC201/211 IP-CAMERA USER MANUAL
34
Fig 5-10 alarm configuration—sensor alarm interface
5.4.5 Sensor schedule
Enter into “Alarm configuration"—“Sensor schedule” refer to Figure 5-11:
Week schedule
User can set the recording time from Monday to Sunday for recording everyday
of a week.
1. Select the sensor which needs to be setup on the "Sensor" pull down list.
Note: The length bar is for each day of the week divided into the 24 hours
of a day. You can use the mouse to click on the pane to set the record
hours. Green means area is selected. Blank means area is not selected.
2."Add": add the schedule record for a holiday
3."Delete": delete holiday schedule
Day schedule
User can set recording time for specific time of a special day, such as a holiday.
1. Select a special date at the "Date" pull down list, press "Add" button to add
that date to the list box on the right side, and move the scroll bar to set the record
schedule for that day.
2. Select a date in the list box on the right side, press "Delete" to remove the
schedule for that day.
Press the "Save" button to save the settings.
Note: Day schedule is better than Week schedule.