Q-See QSTC201 - Manual (Page 21)

QSTC201/211 IP-CAMERA USER MANUAL
21
Step3: Enter into the router’s management interface through IE browser; forward
the port of IP-CAMERA to the IP address of the camera in the “virtual server”. Or
whatever the category is called on the router you are using. Refer to Fig 3-6
Fig 3-6 IP port forwarding
Step4: If the router is using a dynamic IP address, and you want to use a dynamic
domain name so you do not need to be concerned with the IP address constantly
changing on you, please apply for a domain name at a dynamic domain name service
website, such as www.dyndns.com ，or www.no-ip.com . If you want to add the
domainname into the router, please check whether it supports the service or not.
Step 5: Open the IE browser, the setting steps are as same as “Step 2,3 and 4” in
LAN