Q-See QSTC201 - Manual (Page 46)

QSTC201/211 IP-CAMERA USER MANUAL
46
address” can’t operate at the same time.
Fig 5-24 advanced configuration—security configuration interface
5.8.3 Default configuration
Enter into advanced configuration—default configuration refer to Figure 5-25:
Fig 5-25 advanced configuration—default configuration interface
Click “Load default” button to restore all system settings to original value, except
for IP address.
5.8.4 Reboot device
Enter into advanced configuration—reboot device refer to Figure 5-26:
Fig 5-26 advanced configuration—reboot device interface
Click “Reboot device” button to reboot the device.