Q-See QSTC201 - Manual (Page 35)

QSTC201/211 IP-CAMERA USER MANUAL
35
Fig 5-11 alarm configuration—sensor schedule interface
5.4.6 Other alarm
1. Enter into “Alarm configuration"— "Other alarm" refer to Figure 5-12:
2."Alarm type" default is video loss.
3. Select the channel which needs to be setup on the "Channel Number" pull
down list.
4. Select "Alarm out" in the "Trigger alarm out" textbox, which is optional.
5. Press the "Save" button to save the settings.
Fig 5-12 alarm configuration—other alarm interface