Q-See QSTC201 - Manual (Page 18)

QSTC201/211 IP-CAMERA USER MANUAL
18
3
Internet Explorer Remote Access
The network service default settings are shown below:
IP address: 192.168.0.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
HTTP: 80
Data port: 9008
When using the IP-CAMERA for the first time, please connect the device using
the above default settings, and reconfigure the setting according to your network.
Here we are using IE browser (above 6.0 versions) as an example; for operation
using CMS please refer to CMS user’s manual.
3.1 LAN
Step 1: Manually setup the IP address of the PC, the network segment should
be as same as the default settings of IP-CAMERA. Right click “My Network
Places” icon on the desktop, select “properties”; right click “Local Area
Connection” on the pop-up window, and then select “properties”. Select “Internet
Protocol (TCP/IP)” in the “General” tab, click “properties”, manually input
network address information of the PC in the pop up window, refers to figure 3-1:
Fig 3-1 PC network setting