Q-See QSTC201 - Manual (Page 39)

QSTC201/211 IP-CAMERA USER MANUAL
39
Please refer to the following table for parameters and instructions of IP
configuration.
Parameter Meaning
Static IP
IP Address IP address of the server
Subnet mask Subnet mask of the server
Gateway Gateway address of the server
DNS server Domain name analytical server address of the server
Dynamic IP Dynamic IP Dynamic IP Dynamic IP
Dynamic IP Router will distribute IP address automatically
PPPoE PPPoE PPPoE PPPoE
User name User name for broad-band connection
Password Password for broad-band connection
Change IP address through IP TOOL:
Click the device, then double-click or click “Net set” button to enter into
modify interface refer to Figure 5-16
Delete the initial data and input IP address which should exist in the same
LAN with PC
Click “OK” button to save the setting.
Note: dynamic IP can’t change the IP address
Fig 5-16 Change IP address
Note: If IP Tool search can’t find the device, please refer to chapter 3 IE
Remote Access.
5.5.3 Wireless configuration
1. Enter into "Network configuration"--"Wireless configuration" refer to Figure