Q-See QSTC201 - Manual (Page 28)

QSTC201/211 IP-CAMERA USER MANUAL
28
5.2.3 SD Card
Setup steps:
1. Enter into "system configuration" –“Date & Time” refer to Figure 5-3:
2. Usage status: Blue pane means used; red pane means unused.
3. Pressing "Eject card" terminates writing data to SD card, then it can be
ejected safely.
Note: Use of the SD card function should be coordinated with Motion alarm
and Sensor alarm, when alarm is triggered (refer to 5.3 Alarm configuration
for details), pictures can be stored on the SD card.
Fig 5-3 system configuration—SD card interface
5.3 Channel configuration
Channel Configuration includes four submenus: basic configuration, image
configuration, and network image configuration
5.3.1 Basic configuration
Setting steps:
1. Enter into "Channel configuration"-- "Basic configuration" refer to Figure 5-4:
1. Select the channel to be setup on the "Channel Number" pull down list.
2. Input the channel name in the "Channel Name" textbox.
3. Check “time stamp", to display the record time on the video.
4.Use "Position" to position the record time: upper left, lower left, upper right,
lower right.