Q-See QSTC201 - Manual (Page 41)

QSTC201/211 IP-CAMERA USER MANUAL
41
Fig 5-18 network configuration-- DDNS configuration interface
2. Press the "Save" button to save the settings.
Please refer to the following table for parameters and instructions of DDNS
configuration.
Parameter Meaning
DDNS server Address of the website provided by domain name
supplier. The options:
www.dyndns.com and
myq-see.com
User name Log in for the website of domain name supplier
Password Log in for the website of domain name supplier
Setting UP DDNS (Take myq-see.com as example)
NOTE: Before you setup MYQ-SEE DDNS, make sure you are able to remotely
view your DVR using your regular IP address.
1. From a Computer that is on same network as the IP Camera, go to
http://myq-see.com/
2. Click on New User
3. Do the registration
4. Create your Domain name and once it created, check the IP address listed
there is the same IP address that you are using before to connect to the DVR.
5. Now go to your IP Camera - DDNS Config
6. Enable DDNS
7. Host name: enter your domain name
8. User name: it is the email address you are using on the registration
9. Password : enter your password you are using on the registration
Press the Save button.