Q-See QSTC201 - Manual (Page 20)

QSTC201/211 IP-CAMERA USER MANUAL
20
3.2 WAN
Setting up the router:
Step1: Connect according to above steps in LAN, enter into System
Configuration—Network configuration—Basic configuration, setup the port
numbers refer to Fig 3-4:
Fig 3-4 Port setup
Step 2: Enter into System Configuration—Network configuration—IP
configuration, change IP address refer to Fig 3-5:
Fig 3-5 IP setup
Note: The steps above should be saved after changing the port and IP
address. Log back into the device with the saved setting.