Sony XPeria XZ F8331 User Manual

Page 17

Advertising
background image

To edit a custom place

1

From your

Home screen, tap .

2

Find and tap

Settings > Location, then tap the slider to enable location

services.

3

Tap

Mode, then choose High accuracy or Battery saving Location mode.

4

From your

Home screen, tap .

5

Find and tap

Settings > Lock screen & security > Smart Lock > Trusted places.

6

Select the place that you want to edit.

7

Tap

Edit Address.

8

To enter another location, tap the magnifying glass icon and type the address.

Your device searches for the entered location. To use the suggested address,

tap the address.

9

To fine-tune the location, tap the back arrow next to the address, then drag the

location pin to the desired location, then tap

Select this location.

To remove a custom place

1

From your

Home screen, tap .

2

Find and tap

Settings > Location, then tap the slider to enable location

services.

3

Tap

Mode, then choose High accuracy or Battery saving Location mode.

4

From your

Home screen, tap .

5

Find and tap

Settings > Lock screen & security > Smart Lock > Trusted places.

6

Select the place that you want to remove.

7

Tap

Delete.

Keeping your device unlocked while you’re carrying it

Using the On-body detection feature, you can keep your device unlocked while

you're carrying it in your hand or in a pocket or bag. The accelerometer in your device

keeps your device unlocked while it senses that it's being carried. The device locks

when the accelerometer detects that the device has been put down.
When you use the On-body detection feature, you need to be aware of the following

behaviours:

Any time you put your device down and it senses that it's no longer being carried, it

locks automatically.

The device can take up to one minute to lock.

After you get into a car, bus, train or other land vehicle, your device can take between

5 and 10 minutes to lock.

Note that when you get on an airplane or a boat (or another non-land based vehicle),

your device may not lock automatically, so make sure to lock it manually if needed.

When you pick up your device again or get out of the vehicle, just unlock it once and

your device then stays unlocked for as long as you have it on you.

The On-body detection feature can't distinguish whose body is connected. If you give your

device to someone else while it's unlocked using On-body detection, your device may stay

unlocked for the other user. Keep in mind that On-body detection as a security feature is less

secure than a pattern, PIN, or password.

To enable or disable On-body detection

1

From your

Home screen, tap .

2

Find and tap

Settings > Lock screen & security > Smart Lock > On-body

detection.

3

Tap the slider to enable the function, then tap

Continue. To disable the function

tap the slider beside

On.

To set up trusted face

1

From your

Home screen, tap .

2

Find and tap

Settings > Lock screen & security > Smart Lock > Trusted face.

3

Tap

SET UP > NEXT, follow the instructions on your device.

17

This is an Internet version of this publication. © Print only for private use.

Advertising