Screen protection, Starting your device for the first time – Sony XPeria XZ F8331 User Manual

Page 9

Advertising
background image

1

Using your fingernail, drag out the SIM/Memory card tray.

2

Firmly place the SIM card in the correct orientation in position (1) as shown in

the illustration.

3

Firmly place the memory card in the correct orientation in position (2) as shown

in the illustration.

4

Gently push the tray back into the slot until it fits into place.

To remove the nano SIM card

1

With the screen facing down, open the nano SIM/Memory card slot cover.

2

Drag out the nano SIM/Memory card tray using your fingernail.

3

Remove the nano SIM card, then gently push the tray back into the slot until it

fits into place.

To remove the memory card

1

Either turn off the device, or unmount the memory card under

Settings >

Storage & memory > > Advanced > Storage > next to SD card.

2

With the screen facing down, open the nano SIM/Memory card slot cover.

3

Drag out the nano SIM/Memory card tray using your fingernail.

4

Remove the memory card, then gently push the tray back into the slot until it

fits into place.

Screen protection

Before using your device, remove the protection film by pulling up on the protruding tab.

It is recommended to protect your device with a Sony branded screen cover or a

protector intended for your Xperia™ model. The use of third party screen protection

accessories may prevent your device from working correctly by covering sensors,

lenses, speakers, or microphones and can invalidate the warranty.

Starting your device for the first time

It is recommended that you charge the battery for at least 30 minutes before starting

up your device for the first time. You can still use your device while it is charging, see

Charging your device on page 36.
The first time you start your device, a setup guide helps you to configure basic

settings, personalise your device and sign in to your accounts, for example a

Google™ account.

To turn on the device

It is important to use the USB Type-C™ cable (provided) when charging your device as other

types of USB cables can damage your device. It is recommended to charge the battery for at

least 30 minutes before you turn on the device for the first time.

9

This is an Internet version of this publication. © Print only for private use.

Advertising