Sony XPeria XZ F8331 - Manual (Page 51)

To enable auto network switch
1 From the Home screen, tap .
2 Find and tap Settings > Wi-Fi.
3 Tap > Auto network switch > Enable.
WPS
WPS (Wi-Fi Protected Setup™) is a wireless networking standard that helps you
establish secure wireless network connections. If you have little background
knowledge of wireless security, WPS makes it easy for you to set up Wi-Fi Protected
Access® (WPA) encryption to secure your network. You can also add new devices to
an existing network without entering long passwords.
Use one of these methods to enable WPS:
• Push button method – simply push a button on a WPS-supported device, for
example, a router.
• PIN method – your device creates a random PIN (Personal Identification Number),
which you enter on the WPS-supported device.
To connect to a Wi-Fi network using a WPS button
1 From the Home screen, tap .
2 Find and tap Settings > Wi-Fi.
3 Turn on Wi-Fi if it is not already on.
4 Tap , then tap More features > WPS Push Button, then press the WPS button
on the WPS-supported device.
To connect to a Wi-Fi network using a WPS PIN
1 From your Home screen, tap .
2 Find and tap Settings > Wi-Fi.
3 Turn on Wi-Fi if it is not already on.
4 Tap > More features > WPS PIN Entry.
5 On the WPS-supported device, enter the PIN that appears on your device.
Sharing your mobile data connection
You can share your mobile data connection with other devices in several ways:
• USB tethering – share your mobile data connection with a single computer using a
USB Type-C™ cable.
• Bluetooth® tethering – share your mobile data connection with up to four other
devices via Bluetooth®.
• Portable hotspot – share your mobile data connection simultaneously with up to 10
other devices via Wi-Fi, including devices that support WPS technology.
To share your data connection using a USB cable
1 Using the USB Type-C™ cable provided with your device, connect your device
to a computer.
2 From your Home screen, tap .
3 Find and tap Settings > More > Tethering & portable hotspot.
4 Tap the USB tethering slider to enable the function, then tap OK if prompted.
is displayed in the status bar once you are connected.
5 To stop sharing your data connection, tap the USB tethering slider again to
disable the function or disconnect the USB Type-C cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
51
This is an Internet version of this publication. © Print only for private use.