Marantz M-CR502 - Manual (Page 14)

10
NAMES AND FUNCTIONS
BASIC CONNEC-
TIONS
BASIC
OPERA
TIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADV
ANCED OPERA
TIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
BASIC
CONNECTIONS
ENGLISH
CONNECTING HEADPHONES
Connect the 3.5-mm diameter headphone plug into the PHONES jack on the unit.
• When headphones are connected, audio ceases to be output from the speakers of this unit.
CONNECTING THE POWER CABLE
• Plug the supplied power cable into AC power cord connector socket on the unit.
• Plug the power cable into a power outlet.
BASIC CONNECTIONS
Note:
When making connections, take care that the audio volume level of the unit is not set too high.
Note:
The unit is in constant power on mode (standby mode) while the power cable is connected. Be sure to unplug the
power cable to completely turn off power to the unit. Note, however, that the time and timer settings must be made
again when the power cable is re-connected.
M-CR502N_01_ENG.indd 10 08.8.7 5:28:15 PM